Synerper Group Limited
Cable Accessories
Cable Gland
A cable gland is a device that allows the user to pass a cable, wire or tube into an enclosure while providing strain relief and sealing out dust, dirt and liquids. Synerper offers a wide variety of cable glands, from very small (PG7) to very large (M63). Our line of cable glands include plastic and metal varieties with NPT, Metric and PG threading and they are owing waterproof feature by rated IP68 up to 5 bar that can be used permanently under water up to 5 atmospheres. The sealing around the cable is achieved through the sealing grommet. The sealing against the enclosure is achieved through either an O-Ring (all metal glands and PG29 and larger plastic glands), or, through some raised rings on the underside of the hex nut (all plastic glands up to and including PG21).
MATERIAL:
1. Body: PA 6 (UL 94-V2)
2. Seal: NBR
3. Washer: EPDM
4. Thread: PG, M & NPT
TEMPERATURE RANGE: -40 ~ +100 °C
ROHS Compliancy
COLOR: Grey, Black and Others Upon Request
EMC Cable Gland
Waterproof Enclosure
Material: ABS, Epoxy Coated Steel and Stainless Steel
Colour: White, Grey, Black and Clear Front Cover
IP Rating: IP68, IP67, IP65 and IP44
Tubing Fitting
SFPU Series - Flexible Tube Union
Material: PA
Specification of thread: Metric & PG
Color: Black
Features: Special design with inner locking buckle making the mouonting and dismounting done by simple plugging or pulling, tools is not necessary. SFPF Series provides waterproof feature.
SFP Series - Polyamide Flexible Tube
SFPF Series - Flexible Pipe Fitting
Material: PA
Operating Temperature: -30˚C ～ +100˚C
Direction: Insert the wires and cable into the pipe and fit into flexible joint.
Spiral Wrap
SPSW Series
Made from Poly-tetra-fluoroethylene, spiral wrap is a flame retardant (UL 94V2) material that does not emit any toxic or irritating byproducts. It is well suited for use under high temperatures and long term exposure to open flame. It can be used in enclosed environments, and is lightweight and high abrasion resistant. Better performance in compare with Polyethylene. Our PTFE spiral wrap is available in natural milky white.
Properties: The operating temperature up to 500°F (260°C). Highly Abrasion resistance(Better than Nylon and Polyethylene). Highly resistant to chemical, solvents, strong acids, strong alkaline environments. Low moisture absorption (0.05%). Fire Rating at UL 94V2. Suitable for use in robust environment.
SNSP Series
Made from PA 6 Low Smoke Halogen Free Spiral Wrap
SHEC Series
Polyolefin Heat Shrinkable End Cap
The End Cap is adhesive lined to bond with the heat shrink it overlaps. Hot melt adhesive seals and insulates in one step to speed installation. Adhesive lining will prevent moisture penetration, allowing for long term storage of cable. Forms pressure-tight seal on ends of communication and power cables. Shrink ratio of 3:1 insulates a wide range of diameters and irregular shapes. Cross-linked UV resistant material improves chemical and temperature resistance.
Continuous use temperature of up to 110 °C
Shrink temperature of 120-135 °C
Dual wall end cap, with internal wall of hot-melt adhesive provides excellent bonding to plastic and metals.
Capable of sealing the entire surface of a cable or wire
Polyolefin Heat Shrinkable End Cap with Air Valve
SRS Series
Heat Shrinkable Repair Sleeve
Application:
-Repair damaged cable jacket quickly
-Provide sealing, insulation and protection on odd shaped electrical objects
Features:
-Abrasion resistant by semi-rigid outer layer
-Corrosion resistand and moisture proof by the adhesive inner layer
-Halogen Free
-RoHS compliant
SCMC Series
Cable Marker Carrier
High-quality, fully transparent PVC label sleeves for labelling wires, cables and conduits. The Synerper Cable Marker Carrier(SCMC Series) hold tag / tube.
Synerper Clip On Marker
SCOM Series
Synerper Clip On Marker placed on a applicator which enable them to slide individually along the applicator. Just place the flared “shoe” end of the wand against the wire and push the marker onto the wire.
SCOM markers fit perfectly and securely to the cable without damaging the insulation. It can be slipped easily along cables which are very close to each other, thanks to their “chevron” locking design snaps.
Features:
-Diffent colours on applicator in convenient for differentiate sizes of marker
-Fast and easy for installation
-Print adherence (abrasion) resistance, permanent and clear text on marker with groove
-Fire Resistance Rating: UL 94 HB
-Zero Halogen
-Resistant to key fluids, water, detergent, Isopropyl Alcohol & Sodium Hydroxide
-Full range on various cable diameter
Synerper Wiring Duct
SWD Series
SWD-L: Polycarbonate(PC) +Acrylonitrile Butadiene Styrene(ABS)
SWD-P: PVC
Colour: Light Grey
Working Temperature: -25˚C to +90˚C
Product Features:
-Enironmental Conservation, RoHS and REACH
-Flame Retardant, EN 45545
-Halogen Free, EN 45545
-Low Smoke Emission, EN 45545
-Shock Resistant, IEC 61373-2010
-Perfectly work with Wire Retainer and Cover
Copyright © 2007 Synerper Group Limited. All rights reserved.